1. Differences between imported and domestic mounters

At present, the imported mounters account for more than 80% of the market share, mainly because of their stability, good reliability, fast mounting accuracy and speed, few defects, and easy maintenance. Although the domestic mounters have been developed for many years, their quality reliability and stability are still unsatisfactory. The precision and speed of the mounters are far from that of the imported brands, and their value preservation is not high, Therefore, most of the domestic SMT machines are SMT plants with low production capacity or simple products, and the requirements for precision and speed are not high.

2. The new and old degree of the mounter

There are also many brands of imported SMT machines, which are mainly occupied by Europe, America and Japan. The prices of imported SMT machines vary from country to country. Most of the prices of new imported SMT machines are expensive, especially the troika brand of SMT machines. If the SMT manufacturers do not mind second-hand, they can consider importing second-hand SMT machine brands, which are older, better in quality and better in condition, The work on the production line is not much worse than that of the brand new SMT machine of the same model. The important thing is to maintain regular maintenance and give play to the maximum efficiency of the machine.

3. High speed and universal mounter

Different brands have high-speed and medium speed mounters. However, although some brands include high-speed mounters, their quality reputation is not very good, and they can only compete for the market position of medium speed mounters in the market. The brands widely recognized by the market include Siemens (acquired by ASM), Panasonic, Fuji and other three brands; This is just like the BBA in the automotive industry. Although Honda and Toyota also have high-end models, the concept of BMW, Audi and Mercedes Benz is widely recognized by the market for high-end brands.

4. Market holding and hedging ratio

There are many brands and models of imported and domestic mounters. Some brands and models are very unpopular, while some brands and models are very popular. If you want to choose a mounter, you need to determine it from two aspects: the market retention and the value preservation rate. The retention is large, and the parts and later maintenance are more guaranteed. What is the value preservation rate? As a large fixed asset, the placement machine also needs to be weighed.

5. Existing mounter line body

If the existing patch machine line needs to be expanded, the patch machine and equipment of the same brand can be considered, because the early installation, commissioning and technical training can be ignored, and the technicians are familiar with it, so they don't need to spend more energy to re learn, shorten the line's empty time, and maximize the benefits.

To sum up, the purchase of a placement machine cannot be determined from a single placement machine brand. It needs to be based on its own capacity, products made and budget. If the product reliability requirements are high, there are many boards, and the capacity is large and stable, then consider high-speed placement machines, and consider imported high-speed machines, because imported placement machines have high stability.